4-in-1 Programmable Tachometer, Process Meter, Counter, Zero Speed Switch
Field programmable digital tachometer for shaft speed as low as 1 RPM, microprocessor based. Accuracy + 0.4%; 1/8 DIN housing 1/2 digital display. Operating range 500 to 30,000 input pulses per minute. Faceplate gasket kit gives a NEMA 4X rating when installed in similarly rated enclosure. 5Amp form C relay output. Can display rate, RPM,Time, Count, and Total. Universal power supply One model for both 120VAC and 240VAC input.

Dual Voltage Programmable Digital Tachometer w/Blank Lexan face plate
Field programmable digital tachometer for shaft speeds as low as 1 RPM. Microprocessor based. Accuracy + 0.4%; 1/8 DIN housing, 1/2″ four digit display Can calibrate in RPM or other engineering units. Operating range 1 to 30,000 input pulses per minute. Isolated output for upper/lower limits.
Field programmable digital tachometer for shaft speeds as low as 1 RPM. Microprocessor based. Accuracy + 0.4%; 1/8 DIN housing, 1/2″ four digit display Can calibrate in RPM or other engineering units. Operating range 1 to 30,000 input pulses per minute. Isolated output for upper/lower limits.

Panel Mount
Big, bright 1/2″ LED display
Scalable Rate, % and Time units
Single, or dual encoder input with shared display
Multi-purpose tachometer, counter, totalizer or Zero speed Switch
Single (std) or two relay alarm output

Up to NEMA 4X rating (determined by cabinet)
Faceplate gasket kit gives a NEMA 4X rating when installed in similarly rated enclosure.