Murrplastik – Graver 36 d = 0.5 mm – 86721438
Nose angle 36 degree - Graver 36 d = 0.5 mmGravers are conical tools (halved solid metal round bars, ground smooth) with a cutting edge. In principle, the smaller the angle at the point, the more constant is the engraving width, even if the material to be
Nose angle 36 degree – Graver 36 d = 0.5 mm
Gravers are conical tools (halved solid metal round bars, ground smooth) with a cutting edge. In principle, the smaller the angle at the point, the more constant is the engraving width, even if the material to be engraved is not flat. We would recommend our special 15 gravers when working with spindles without height scanning. The overall diameter gives the minimum engraving width. The deeper it presses into the material, the wider the engraving width. Ratio of plunge depth: engraving width is predominantly determined by the angle at the point.
Universal graver for engraving work
For materials like plastic, aluminum, …
Engraving systems
The graver can be used in conjunction with the MGS series CAM engraving system and the engraving option.
Color Stop Ring:Yellow
D mm: 0.5
D1 mm: 3
L mm: 40
Cutting angle : 36
Packing Unit: 1
Reviews
There are no reviews yet.