Railway technology, taped, marking length 20mm, with 12mm printable info section

Color: White
Marker Length mm: 20
Flat Area mm: 6.2
Cable Diameter max. mm: 3.2
Shrinkage area from – to 0mm: 3.2-1.6
Recommended Color Ribbon: FB-BT 80mm x 300m
Software Article: A70
Packing Unit: 2000

Polyolefine (PO) heat-shrink tube, type ST-BT-H

Halogen-free Polyolefine heat-shrink tube for labelling cables with excellent properties for use with the thermal transfer method. This conduit, with its special approvals, is particularly suitable for applications in the fields of air and rail transport, marine, offshore and tunnel construction.

The pre-perforated ST-BT-H 20/12 heat-shrink tube is divided into a 20mm long section for cable identification and a 12mm long section, which contains information to simplify wiring the circuits. This section can be discarded after the circuit is wired. This method helps to significantly reduce the processing time

Properties

Excellent printing properties

Flat-rolled for thermal transfer printing

Halogen-free, thin-walled

Shrink ratio 2:1

Vehicle category 1a according to BS 6853 (1999)

Fire resistance ASTM D 635-HB

Shrink temperature >90C

Application temperature -55C to +105C

Standards

ASTM D 635-HB flammability

Boeing BSS 7239, formation of toxic gases during M7 material incineration

Rail standards

EN45545-2 Tier 3x HL3 (R22)

BS6853 (1999) vehicle category 1a

UNI CEI 11170-3 Tier LR4

DIN 5510-2 Annex C Low Smoke Toxicity

DIN 5510-2 Drip Class ST2

DIN 5510-2 Smoke Formation Tier SR2